 |
||
|
|
||
| Glass Fusing Center Components—and How To Use Them |
||
| The System 96 Glass Fusing Center is a program designed to make fusing easy and fun for everyone. The components listed below are available for purchase from your supplier or can be cut from Sheet Glass as needed. | ||
|
|
||
| Blanks | Base layer for projects |
|
| Sheet Glass | Assorted transparent, opalescent, and specialty glass Use with glass cutter or nippers to create shapes. Can be cut to smaller sizes and used as project Blanks. |
|
| Nippits™ | Assorted colors of small glass pieces Use with glass nippers to create random-sized pieces, or with glass cutter for specific small shapes. |
|
| Chips | Small squares (approx. 1/2-inch) of various colors No cutting necessary; a ready-made design element. |
|
| Strips | Slender lengths (approx. 1/2-inch wide x 12-inches) of various colors Use entire length, nip, or cut. |
|
| Rods | Various colors of pencil-thick glass Nip off 1/4” or smaller bits to create “dots” or bumps. Nip longer lengths for borders or bold design elements. |
|
| Noodles | Assorted colors of fettuccine-like strands Break with nippers. |
|
| Stringer | Assorted colors of thin strands like angel-hair pasta Break with fingers or nippers. |
|
| Frit | Ground glass, in various particle sizes and many colors Sprinkle, pour, or place with tweezers to create, decorate, or accent designs; use with Klyr-fire adhesive. |
|
| CutUps™ | A variety of pre-cut glass shapes in assorted colors No cutting necessary; use as design elements. |
|
| Dichro Shapes | Metallicized color-shifting sparklers in pre-cut shapes No cutting necessary; use as design elements. |
|
| BorderRounds™ | Pre-cut curved glass sections Use in combination to create rims for round Blanks. No cutting necessary. |
|
| Dichroic Glass | Small pieces of metallicized color-shifting sparklers Nip or cut to desired shape. |
|